الوصف
The new Fenix PD35R rechargeable flashlight is the upgraded replacement to the ever-so-popular Fenix UC35 V2.0 flashlight. Fitted with the Luminus SFT40 LED, the PD35R flashlight delivers a maximum of 1700 lumens at a distance of 1158 feet (353 meters). Operation is simple with the dual tail switches. Turn the light on and off with the large tactical switch and cycle through the six lighting modes via the smaller functional switch. The in-body USB-C charging port allows you to conveniently charge the included 18650 Li-ion battery (ARB-L18-3400) whenever the side-mounted battery level indicator provides notice of a low battery. Compact and built-tough, the Fenix PD35R flashlight is IP68 rated; dust proof, and waterproof underwater to two meters.
SPECIFICATIONS
Max Lumens: 1700
Max Beam Distance: 1158 feet (353 meters)
Max Runtime: 100 hours
Lighting Modes: Six lighting modes including five brightness levels and strobe
Bulb Type: Luminus SFT40 LED with a lifespan of 50,000 hours
Color Temperature: Around 6500K
Size: Length: 5.35” (136mm) Head: 0.91” (23.2mm) Body: 1.00” (25.4mm)
Weight: 4.94 oz. (140g) including battery
Battery: One included 18650 Li-ion rechargeable battery or two CR123A lithium batteries (not rechargeable)
Included: ARB-L18-3400 battery, USB Type-C charging cable, holster, lanyard, spare O-ring
Warranty: 2 Years within KSA.
MORE INFORMATION
Uses a Luminus SFT40 LED with a lifespan of 50,000 hours.
Included a 3400mAh battery and is compatible with 2 x CR123A batteries.
Instant activation and instant strobe with dual tail switches.
USB Type-C charging port with inner waterproofing treatment.
Boot-up battery level indication and low-voltage warning.
Included a premium pocket clip and lanyard for convenient use.
Made of durable A6061-T6 aluminum.
Premium type HAIII hard-anodized anti-abrasive finish.
Operating Instruction
Switches
Main switch: for on/off and instant activation.
Auxiliary switch: for output selection and instant strobe.
On/off
Tap the main switch to silently and momentarily turn on the light, releasing the light that will go out.
Fully press the main switch to constantly turn on the light, and press again the light will go out.
Output Selection
With the light switched on, single click the auxiliary switch to cycle through Turbo→Eco→Low→Med→High.
Strobe
With the light switched on, press and hold the auxiliary switch for 0.5 seconds to enter the strobe, and click the auxiliary switch once again to turn back to the general mode.
With the light switched off, press the auxiliary switch to enter the strobe, release the light will go out.
Intelligent Memory Circuit
The light memorizes the last selected output excluding Strobe. When turned on again the previously used mode will be recalled.
Battery Replacement
Unscrew the light tail and insert the battery with the anode side (+) towards the light head, then screw the light tail back on.
Charging
First, switch off the light and plug the USB A socket of the charging cable into an electrical outlet, then connect the USB Type-C socket of the charging cable to the light.
The indicator will display red while charging and will turn green when fully charged.
Once charging is completed, be sure to close the anti-dust cover to maintain the dustproof and waterproof ability.
Note:
The normal charging time of the included Fenix ARB-L18-3400 rechargeable battery is approximately 3 hours from depletion to full charging.
Recharge a stored light every four months to maintain the optimum performance of the battery.
The light is unavailable while charging.
Charge the flashlight when it is turned on, and the light will turn off immediately. After removing the charging cable, it will automatically recall the memorized lighting mode. For avoiding the risk, please turn it off before charging.
Battery Level Indication
Each time the light is turned on, the indicator will indicate the battery level and will last for 3 seconds.
Green light on: saturated 100% – 85%
Green light flashes: sufficient 85% – 50%
Red light on: poor 50% – 25%
Red light flashes: critical 25% – 1%
Note: This only works with Fenix ARB-L18 series rechargeable battery.
Intelligent Overheat Protection
The light will accumulate a lot of heat when used on High or Turbo modes for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user the reselection of High or Turbo modes.
Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output mode, the light blinks 3 times every 5 minutes to remind you to timely recharge or replace the battery.
Note: This only works with Fenix ARB-L18 series rechargeable battery.
Usage and Maintenance
Disassembling the sealed head can cause damage to the light and will void the warranty.
Fenix recommends using only a high-quality protected battery.
If the light will not be used for an extended period, remove the battery for proper storage.
Unscrew the tail cap or remove the battery to prevent accidental activation during storage or transportation.
Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．
Periodic cleaning of the battery contacts improves the light’s performance as dirty contacts may cause the light to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: Poor battery level.
Solution: Recharge or replace the battery.
B: The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don’t work, please contact your authorized distributor.
Warning
Do place this light out of the reach of children!
Do NOT shine the light directly into the eyes of anyone!
Do NOT shine flammable objects at close range, to avoid burning objects or causing danger due to high temperatures!
Do NOT use the light in inappropriate ways such as biting in the mouth, to avoid personal injury or life threats when the light or internal battery fails!
This light will accumulate a lot of heat while working, resulting in a high temperature of the flashlight shell. Pay attention to safe use to avoid scalding.
Turn off and lock the light or remove the battery from the light to prevent accidental activation when the light is placed in a closed and flammable environment such as pockets and backpacks!
The LED of this flashlight is not replaceable; so the whole light should be replaced when the LED reaches the end of its life.
المراجعات
لا توجد مراجعات بعد.